Magnetic Switch 7A
Very small and very strong
Introduction
This is a very small switch designed for F3F and F3B remote controlled model gliders. With this switch your model can be turned on or off without your need to access it internally. Just move a magnet over the switch, on the outside of the model, and it turns on. To turn it off just pass the magnet by the switch again. The switch has an ultra low stand-by consumption in off-state. The consumption is so low that the switch can be connected to a 300mAh battery for several years without discharging it.
Technical Data
Input voltage range: 3v~13v
Output current constant: 7A
Output current burst: >20A
Ultra low stand-by current: 5µA (micro-ampere)
Connectors: JR-type
Wire: 0.5mm2 / AWG 20
Weight including cables: 4.3 grams / 0.15oz.
Length including cables: 18 cm / 7 in
Dimensions: 25 x 8 x 5 mm / 0.98 x 0.31 x 0.20 in
Operational temperature range: -40C to +50C
Production test
All switches have been tested with 10A for 30 sec before delivery. Standby consumption is controlled and a visual inspection is made.
Price includes
Magnet
Manual
Magnetic Switch
You will receive a confirmation e-mail from PayPal within one hour of placing your order.
