Magnetic Switch 7A
Very small and very strong.
This is a very small power switch designed for F3F and F3B remote controlled model gliders. With this switch your RC model can be turned on or off without your need to access it internally. Just move a magnet over the switch, on the outside of the model, and it turns on. To turn it off just pass the magnet by the switch again. The switch has an ultra low power consumption in off-state. The consumption is so low that the switch can be connected to a 300mAh battery for several years without discharging it. The switch has a built-in failsafe function. It remembers its state for at least 10 sec, if disconnect from the battery. It will protects the switch against power glitch caused by bad battery connection etc.
Input voltage range: 3v~13v
Ultra low dropout voltage: 40mV@11A
Output current constant: 7A @ +25C ambient temperature
Output current burst: >20A
Ultra low stand-by current: 5µA (micro-ampere)
Wire: high-quality 0.5mm2 / AWG 20
Weight including cables: 4.3 grams / 0.15oz.
Length including cables: 18 cm / 7 in
Dimensions: 25 x 8 x 5 mm / 0.98 x 0.31 x 0.20 in
Operational temperature range: -40C to +85C
All switches have been tested with 10A for 30 sec before delivery. Standby consumption is controlled and a visual inspection is made.
We recommend the New Smart Magnet Holder for all our products.
Magnet and Stickers
Magnetic Switch Manual